Dental Lab Jewelry

Foot ON/OFF Control system: 1PC 4. Handpiece Support: 1PC 5. Straight Handpiece: 1PC 6. Contra-Angle Handpiece: 1PC 7. N3/ 35K RPM Marathon Micromotor Polishing Dental Lab Handpiece Jewelry /Kit &Bur. Dental Lab Marathon Electric Pol. Foot ON/OFF Control system: 1PC. Set of 10 pcs Drills Burs. In one plastic box. To avoid the problem of speed loose control and maintain long lifespan of this machine, please do turn the. Speed to “min” with the speed controller before start the following operation : push “on”or”off” button. Switching bur running between clockwise and reversed or Switching control between manual and foot pedal. Please remember to make the speed controller zero when switch on or off the machine and when you do Reversible Switching. Attention: The bur for Contra-Angle Handpiece must have a card slot (the diameter of the bur handle: 2.35mm). Compact sized control box with precise smaill & strong micromotor handpiece. Very High-powered and quality 0-35,000rpm. Tips size :2.35mm. Easily restored back to the original position. Non stage speed system(it’s well designed to output from zero to 35,000rpm by using non stage speed system). Right & Left turning ability. Foot ON/OFF switch system. Low Speed 22,000-27,000 rpm. The shank of the instrument mounted therein is 2.35 mm. Fastening of the instruments with a turning latch. For any lab or E-type motors. Working pressure: 0.3MPa (4-hole). 0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure). Air consumption: about 56L/min. Ratio: 1:1. Dental Lab Steel Carbide Burs for Polishing Teeth Drill Handpiece 2.35mm. Shank Diameter:2.35mm/. Fit for Dental Handpiece with 3/32 inch collect. The main features of carbide rotary burs. It can be used in processing all kinds of metals(it involved all kinds of Hardened Steel)and nonmetal(such as marble, Jade, bone). The hardness of the workpiece is up to. The small, short-handled grinding wheel can be replaced by it in most part of work without dust pollution. It has high processing quality, high polishing, and can processing various shapes moulds with high precision. It has long service life, 10 times longer than the high speed steel cutter, 200 times longer than the durability of the small grinding wheel. It is not only easy to master, use, but also safe and reliable. Labor intensity can be reduced, and better the working environment. High economic efficiency, and comprehensive processing cost Can be reduced 10 times around. Carbide rotary burrs are usually driven by hand-held electric, or wind-energy tools (also available on machine tools). The tool must be clamped rightly when using. It is better to choose reverse milling as cutting type to avoid reciprocating cutting. The work should be to avoid the chip flying. Please wear the protective glasses to avoid scraps flying-out when you are working. The pedal only functions as a switch and cannot be adjusted. The sale of this item may be subject to regulation by the U. Food and Drug Administration and. State and local regulatory agencies. If the item is subject to FDA regulation. If you have questions about legal obligations regarding sales of medical devices. You should consult with the FDA’s Center for Devices and Radiological Health. Thank you for your cooperation. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\Healthcare, Lab & Dental\Medical, Lab & Dental Supplies\Dental Burs, Polishers & Finishers”. The seller is “wumingzhou” and is located in this country: US. This item can be shipped to United States.

• Type: Dental Lab Marathon Electric Micromotor
• Handpiece Type: High Speed
• Head Material: AS SHOWN
• Hose Compatibility: Burs only for Straight handpiece
• Power Source: Electric
• Handpiece Angle: Contra Angle Straight Handpiece
• Note: Burs only for Straight handpiece not Contra Angle handpiece
• shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
• Brand: Unbranded/Generic
• Shank Diameter: 2.35mm/
• Low Speed: 22,000-27,000 rpm
• Noise: ≤68dB
• Air consumption: about 56L/min
• Ratio: 1:1
• Working pressure: 0.3MPa (4-hole)

Powerful torque and continuously variable speed control. No heat after long hours of operation by effective electrical design. Easy change of the driving direction for efficiency. Foot pedal for Variable speed control. Automatic Stop turning on red light are resetting when overloaded. Portable and compact size. Non-stage speed dialing system. Continuous variable speed control. Forward & Reverse Switch. Optional Variable Control system foot pedal (Hand and foot control system can not be operated at the same time). Automatic stop and resetting when overload is caused. Available Voltage for worldwide users. Multipurpose Micromotor for dental, laboratory, jewelry, industry. Good work for polishing, Cutting, milling, trimming, grinding, casting moulds or materials and finishing surface. Simple and easy operation (twist the handle counter-clock wise to change the bur and can be easily restored back to the original position). Non-load Speed: 35,000 rpm Max. Collet Sleeve size: 3/32. Suitable Bur Size: dia. Compatible with our N2 N3 N3-T N7 Control Box. 35K rpm Handpiece 1pc. The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. IMPORTANT INFORMATION ON OUR POLICY AND FEEDBACK. Feedback if you are satisfied with our items. We try to be fair and accurate with all of our product listings and descriptions. If there is a problem, we can work together to resolve it. We strive to always be extremely fair and always try to work with reasonable customers. We will always make every attempt possible to resolve issues if we made a mistake. Please do not assume a mistake is intentional. Let us know if our service could be better! United Sates, Macao, Hong Kong, Taiwan, North Korea, South Korea, Japan, Philippines, Cambodia, Malaysia, Mongolia, Thailand, Singapore, Indonesia, Vietnam, Australia, Papua New Guinea, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Canada, Luxembourg, Malta, Norway, Portugal, Sweden, Switzerland, Spain, Greece, Italy, United Kingdom. Please repack the item carefully. 510(K) Number: K181691 Regulation Number: 872.4200 Classification Product Code: EFB Subsequent Product Code: EGS. This item is in the category “Business & Industrial\Healthcare, Lab & Dental\Handpieces & Instruments\Dental Handpieces”. The seller is “seller2012uk” and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Model: N7
• Type: Micromotor Polisher
• Brand: Marathon
• Intended Use/Discipline: Dental Laboratory, Dentistry